frame

Yeni Marlin Güncellemesi

drwildmfbdrwildmfb Administrator
kategorisi Yazılım
Marlin%20Logo%20GitHub.png
Marlin kullanan arkadaşlar için yeni marlin güncellemesi yayınlandı 4 saat önce yayınlanan güncellemede yapılan güncellemeleri aşağıda sıraladık

CoreXY and CoreXZ:
  • #3127: XY BABYSTEPPING for CoreXY and CoreXZ
  • #2995: Add CORE support to st_get_position_mm (and elsewhere)
Hosts, GCode:
  • #3109: Add "Host Keepalive" (enabled by default) to inform hosts when Marlin is busy
  • #3219: Send position to hosts after some commands.
  • #2983: Remove "ok" from the output of M280, M301, M304, M851
  • #3052: Fix "M145" output in M503 report
  • #3108: Improved handling of M110 for hosts
  • #2985, #2987, #3051, #3044, #3027, #3111: Many more fixes for GCode handling
LCD Controllers and SD cards:
  • #3114: Option to reverse the click-wheel direction in menus
  • #3202: M303 PID Autotune from the LCD menu, applying the result
  • #3156: Fix CardReader::lsDive()
  • #3157: Use variable in lcd_erase_line()
  • #3151: Update the pt-br translation
  • #3116: Fix value edit click bugs
  • #2989: Blink XYZ on display when positions are uncertain
  • #2942: Better number format for editing Delta Jerk and Z Steps
  • #2973: Update splash screen with current no-domain
  • f18d3f4: LCD-based movement better-constrained for Deltas (#1869)
Minor bugs:
  • #2902: Fix Z min endstop stepper.cpp
  • #3161: Fix initial extruder direction for second/third/fourth extruder if they run inverted to the first
  • #3050, #3126: Fix stack overflow issue with many LCD movements
  • #3132: Fix a bad "heating failed" error when starting to reheat a warm extruder
  • #3092: Fix Printrboard with LCD
  • #3077: Prevent a kill() from rebooting with USE_WATCHDOG enabled
  • #3066: Fix disable_all_heaters() for MAX6675
  • #2848: Fix Rigidbot LCD Panel Support
  • #2821: Fix status LEDs update when reinitializing the display
  • #3222: Fix endstops disabling after homing, even without ENDSTOPS_ONLY_FOR_HOMING
  • #3197: Fix conflict between servos and PWM current control
  • #3177: Save all M665 parameters in EEPROM
Homing, Bed Leveling:
  • #3164: Fix #3160 - MESH_BED_LEVELING broke correct G1 movement in Z
  • #3107: MIN_Z_HEIGHT_FOR_HOMING replaces Z_RAISE_BEFORE_HOMING
  • #3107: Adjustments to Z Raise options for probes and homing
  • #3102: Bugfix: G28 was lifting Z-axis multiple times
  • #3013: Enhanced #3010 - formal Mesh/Manual dependency
  • #3057: Fix Z_RAISE_AFTER_PROBING for non DELTA printers
  • #3001: Fix Z-raise order with Z_SAFE_HOMING
  • #2978: Apply Mesh Bed Leveling matrix when switching extruders
  • #3089: Fix raise_z_for_servo for Z offsets below the nozzle
  • #3124: Update the bed topography output in G29
New Hardware Support:
  • #3112: Formal support for the MAX31855 thermocouple
  • #3182: Support for Printrboard Rev F
  • #3086: Support for multiple PWM fans (for extruders)
  • #3201: Hephestos configuration improvements
New and Experimental Features:
  • #3069: Very New support for DELTA with M48 Probe Repeatability Test
  • #3043: Example configuration for Kossel XL
  • #2976: Move the experimental Configurator to its own repository
Configurations:
  • #2988: Automatically assign the next open E connector for Y2/Z2
  • #3131: Allow override of PWM_MOTOR_CURRENT in configuration
  • #3105: Much cleanup of configuration descriptions and code comments
  • #3053: Improve description for nozzle-to-probe offsets
  • #2986: Enable USE_WATCHDOG by default
  • #3031: Fix board type for Hephestos: RAMPS 1.4
  • #2868: Fix AUTOTEMP documentation in configs
  • #3018: K8200: sample config back in sync



ındirmek ıçin Tıklayınız

Yorumlar

  • ERSNKERSNK Yeni Üye
    Deneyen arkadaş varmı acaba,
    ben denedim z motorları çok güçsüz dönüyor
  • ERSNKERSNK Yeni Üye
    düzelttim tesekkurler,
    yeni yazılım daha güzel olmuş gibi
  • marlin nasıl yükleniyo yardımcı olabilecek biri varmı ayarl falan nasıl yapılıyor acaba

Bir Yorum Bırak

Görsel/dosya bırak

3d Yazici Destek

| 3d Yazıcının kalbi burada atıyor
3d Yazıcı Destek© 2017 | 3d yazıcılar hakkında herşeyi bulabilceğiniz, ücretsiz yardımlaşma ve dayanışma forumudur.
Powered by VanillaForums, Designed by Raven Creativity

İletişim

info@3dyazicidestek.com
3dyazicidestek@gmail.com
0 505 948 47 57

Get In Touch